Rotary Coaxial Cable Stripper K-352
A rotary coax stripper with a flip cassette — RG59/6 on one side, RG7/11 on the other — plus round and flat cable jacket stripping and a built-in cutter.
Typical work: CATV and CCTV coax termination; Satellite and antenna drop installation; Structured cabling prep work.
Get a Quote Add to Kit WhatsApp UsGoing into a kit? Add this tool to your kit list and quote the whole set at once — or take it on its own, neutral or with your label.
Neutral stock in small lots, or private label made to your requirements. Prices on request — EXW factory pricing.
K-352 key features
- Reversible cassette: RG59/6 on one side, RG7/11 on the other — flip it, no spare parts to lose
- Two-blade rotary strip takes jacket and dielectric in one go
- Thumb-screw blade adjustment sets depth for different insulation thicknesses
- Also strips round UTP/STP and flat telephone cable jackets
- Built-in cutter at the nose for trimming the cable to length
- Large finger loop — the tool rotates around the cable in a few turns
- Bright yellow body, hard to lose on site or in the toolbox
K-352 specifications
| Cable types | Coaxial RG59, RG6, RG7, RG11; round UTP/STP; flat telephone cable |
|---|---|
| Cassette | Reversible — RG59/6 one side, RG7/11 the other |
| Function | Two-stage stripping plus cable cutting |
| Blade adjustment | Thumb screw, depth adjustable |
| Body | ABS, yellow |
| Weight | Lightweight pocket-size tool |
| Dimensions | — |
How the Rotary Strip Works
Seat the cable in the cassette sized for it — RG59/6 or, with the cassette flipped, RG7/11 — close the tool and turn it around the cable with a finger in the loop. Two blades work at once: one scores the jacket, the other the dielectric, so the strip comes off in a single pull at consistent lengths.
Blade depth is the only setting: wind the thumb screw out for thick jackets, in for thin ones, and test on a scrap end. The flat and round cable slots in the body handle data and telephone cords the same way.
Where the K-352 works
CATV and CCTV coax termination
Part of the Fiber Strippers range — see the specifications above for the figures that matter on this work.
Satellite and antenna drop installation
Part of the Fiber Strippers range — see the specifications above for the figures that matter on this work.
Structured cabling prep work
Part of the Fiber Strippers range — see the specifications above for the figures that matter on this work.
K-352 components
- Rotary coaxial cable stripper K-352
Documents for this model
Product Catalog 2026 — this model appears in our full-range catalog (PDF), published in the Downloads center.
User manual — if you need the manual for this model now, ask via the inquiry form below or on WhatsApp and we will send the available documents with your quote.
More fiber strippers
Questions about the K-352
Can the K-352 carry our own brand?
Private labeling is made to your requirements and confirmed per order — labels with your logo, part numbers and barcodes on the tools, the inner boxes and the outer cartons, ready for your warehouse. The products most often labeled are the K-35 cleaver, the KS-1 Kevlar shears and the K-870 stripper.
Can we order a small lot, unbranded?
Yes. Neutral stock is held for the core range: small lots are welcome, you can mix models in one shipment, and restock as you sell. Prices are on request — EXW factory pricing.
Ask for a quote — K-352
Tell us the quantity, and whether you want it neutral or with your brand on it.